This test rig is designed for service life testing on eight CV boots (four shafts) at high or low temperatures (-40°C to +150°C). Both universal joints can be swivelled between -5° and 55°, while the speed can be adjusted from +3,000 rpm to -3,000 rpm. Integrated grease detection with individual shut-off.
-
HOT / COLD - temperature tests on drive shaft boots
Speed + 3,000 rpm Speed dynamic ~500 rpm/s Pitch angle -5° - 55° (2x) Max. bending torque 400 Nm Axial adjustment of one joint side ± 50 mm / 10 mm/s Axial force ~ 3500 N Temperature range -50 °C bis +150 °C Test specimen length 400 - 800 mm (CL-CL) Number of test specimens 4 Camera dimensions 1,200 x 1,200 x 1,200 mm (H/W/D) Cooling/heating Approx. 1.5 K/min (average) Temperature consistency 0.2 - 2 K (time range) Speed
+ 3,000 rpm
Speed dynamic
~500 rpm/s
Pitch angle
-5° - 55° (2x)
Max. bending torque
400 Nm
Axial adjustment of one joint side
± 50 mm / 10 mm/s
Axial force
~ 3500 N
Temperature range
-50 °C bis +150 °C
Test specimen length
400 - 800 mm (CL-CL)
Number of test specimens
4
Camera dimensions
1,200 x 1,200 x 1,200 mm (H/W/D)
Cooling/heating
Approx. 1.5 K/min (average)
Temperature consistency
0.2 - 2 K (time range)
The technical data is standard data and can be altered upon request.
-
